Bespoke fitted wardrobes made to your measurements in Dénia
A fitted wardrobe is built for one specific space: it takes the width from wall to wall, the height up to the ceiling and the depth the building allows. If you are looking for made-to-measure fitted wardrobes in Dénia, here you will see when this solution is worth it, how to measure up a space that is almost never square, which doors work best and what to check before installation, so that the result looks like part of the home.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Before designing
Dénia: your wardrobe is built from the exact measurements of that free space in your home
Alcoves and recesses in Dénia homes rarely match to the millimetre. That is why a fitted wardrobe starts from the real measurements and is finished with trim pieces that take care of any difference.
- Alcove
- End of a corridor
- Side of a bedroom
- Under a beam
A piece that belongs to the space
In Dénia you can make use of a recess in the wall or take the unit from floor to ceiling, with finishes adjusted to the real dimensions of each surface.
The wall matters too
In Dénia, we check for damp, out-of-plumb walls, skirting boards and services before anything else. If building work or electrical work is needed, it is specified in the quote.
02 — Measurements
The measurements worth knowing
Ask us for your first quote without worrying about the measurements – approximate ones are fine. We take the final ones ourselves at your home in Dénia.
- Width of the recess, measured three times at different heights: A1–A3
- H1–H2Check the height on both sides and use the shorter one
- FAvailable depth
- !Radiators, sockets, windows and switches: note where each one is
03 — Finishing
Uneven walls, ceiling and skirting board
The wardrobe sits level
If your wall in Dénia is slightly out of true, finishing with filler strips or cut-to-size cover panels hides the unevenness.
Right up to the top, no gap
In Dénia, the design can be a single full-height unit or a top cupboard that stands on its own. An adapter piece disguises the difference in level.
Removed or worked around
In Dénia, the skirting board can be removed or dealt with in another way; we settle this before we start making anything.
04 — Interior
How to organise the interior
We start from what you store, not from a standard module.
- 01One hanging rail for long items and another for short ones, one above the other when there is room
- 02Fixed or adjustable shelves
- 03Keep accessories and underwear in well-organised drawers
- 04Shoe rack, trouser rack or pull-out trays
- 05Thanks to the top cupboard, your suitcases, blankets and last season's clothes have a place of their own
05 — Doors
Which doors to choose
Hinged
+You can see the whole interior at once.
−They need clearance at the front: without it, the doors cannot swing open.
Sliding
+They don't take up room space.
−Each time you open them, they uncover only part of the interior and keep the rest covered.
When designing your wardrobe in Dénia, bear in mind that the exterior finish – melamine, lacquered, mirror, glass or a mix – changes both the style and the quote. The inside can be simpler.
07 — Price
What affects the price?
An approximate figure comes first. The exact amount is put in writing and sent to you before manufacturing begins.
Measurements and finishing
Out-of-square walls, height up to the ceiling and top cupboard.
Doors
Doors, material and opening system.
Interior
Layout, drawers and fittings.
08 — Process
How your order progresses
- 01First detailsSend photos, rough measurements and the address of the property, and we will give you a figure to give you an idea.
- 02 · measuringWe measure the room to the millimetreWe take readings of the walls, ceiling and skirting board at several points.
- 03A design stage, only if neededWe work with fixed dimensions and conditions set out in advance in the proposal.
- 04Fixed priceWe give you a final figure that covers fittings, materials, doors, interior layout and installation, plus a clear schedule.
- 05Your approval and first paymentYou review the proposal at your leisure, give your go-ahead and pay the deposit we have agreed.
- 06 · 2–3 wksWorkshop and cuttingThe carcass and the pieces that fit the unit to your space are made.
- 07Installation and fine-tuningWe guarantee a perfectly plumb unit, finishes with no gaps against walls and ceiling, and doors that open and close precisely.
- 08Final check with youWe check door by door and drawer by drawer. Anything still to be finished is noted down.
What to prepare before installation
- Empty, accessible recess
- Floor and walls finished
- Electrics sorted inside the recess
- Access to the building entrance and lift
Limits of this solution
A wardrobe won't fix damp: it needs to be treated first.
Only when the quote says so, plasterboard, building or electrical work is added in Dénia.
A wall that is badly out of plumb needs wider trim pieces to even out the space, and in Dénia those pieces are more noticeable in the finish.
When a fitted wardrobe is worth it
In Dénia, a fitted wardrobe makes sense when you have an alcove, a stretch of unused wall or a wide hallway where a freestanding piece would leave dead gaps above and to the sides. By closing off the space from wall to wall and floor to ceiling, there is no room left for dust or for that useless strip above the doors. It is also the usual choice when you want the bedroom to look uncluttered: the wardrobe disappears into the wall and only the doors remain.
On the other hand, if you plan to move soon or the space is very irregular, another option may suit you better. A fitted wardrobe is designed to stay, which is why it is planned carefully.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Measuring the space: width, height and depth in Dénia
A recess in the building does not measure the same at the top as at the bottom. You need to take the width at three heights, the height at both ends and the depth at several points, and then use the smallest measurement on each axis. Walls bulge, floors have an almost imperceptible slope and ceilings sag by a few millimetres. If you design to the largest measurement, the wardrobe will not fit.
Also note anything that interrupts the space: a beam, a duct, a socket, a radiator pipe. These obstacles can be solved with trim pieces or an adjusted module, but you need to know about them before drawing up the design. With the real measurements of your home in Dénia to hand, the configurator lets you arrange modules across the exact width.
Have you already measured the space?
Attach a picture of the space and the approximate dimensions in a WhatsApp message, and you will get a first idea of your wardrobe from us.
Skirting boards, uneven walls and finishing up to the ceiling
- 01
The join between wardrobe and wall decides whether the wardrobe looks built in or tacked on. Skirting boards are trimmed or removed so the wardrobe sits on the floor, and the wardrobe's own plinth is usually set slightly back so your foot does not knock against it. Uneven walls are absorbed with a closing profile or a top fascia cut to the line of the wall.
- 02
At the top, the ceiling finish hides any irregularity with a batten or a panel that is fitted on site. For a floor-to-ceiling wardrobe, a few millimetres of clearance are left during installation and covered by the trim. It is precision work, and reason enough on its own not to buy an off-the-shelf unit.
Doors and access to the interior
The type of door is chosen by the space you have in front of it, not by fashion. Hinged doors give full access to the whole interior, but they need room to open; in a small bedroom or facing the bed they can be awkward. Sliding doors take up less room, although only part of the interior is visible at any one time. Bifold doors, with leaves that fold back, work when the space is narrow but you want to see almost everything.
In a wide fitted wardrobe, the usual approach is to combine them: hinged doors on the hanging-clothes module and sliding doors for the rest. Think about your routine: if you open the wardrobe in the dark and in a hurry, wide doors with no tracks on the floor are more practical.
Layout for clothes, drawers and top cupboard
Inside a wall-to-wall wardrobe, the width is divided into columns. One with a long hanging rail for coats, another with a double rail for shirts and trousers, a block of drawers and shelves for jumpers. If the space reaches the ceiling, the top cupboard holds suitcases and out-of-season clothes, and its door can be smaller so as not to weigh down the composition.
A useful rule is to keep what you use every day in the middle band, what you rarely take out at the top and shoes at the bottom. The interior layout can be fine-tuned at your own pace in the configurator, and if something does not fit your routine, it can be changed before manufacture.

Ask us to come and measure up in Dénia
- 01All we need is your name and which part of Dénia you live in.
- 02We contact you on WhatsApp and you tell us which date suits you.
- 03It costs €50 to measure up your recess, although if you go ahead with us that charge is waived.
What to check before installation
Before the wardrobe arrives, the space must be ready: walls finished and painted, the final flooring laid and electrical points decided. If the wardrobe has interior lighting or a nearby socket, the cable is run down the side before it is closed up. Access should be cleared, because the pieces arrive as long boards that have to go up the stairs or in the lift.
On installation day, check the measurements against the order sheet, make sure nothing obstructs the work and that the floor is clean. Installation is arranged separately from manufacture, so set the date as soon as the delivery time for the pieces is confirmed.
What affects the price of a fitted wardrobe in Dénia
- 01
Three factors affect the price: the area covered, the type of door and the amount of interior fittings. A fitted wardrobe with four simple hinged doors costs differently from one with large-format sliding doors and a mirror. Every drawer, every extra rail and every metre of trim adds to the total, as do the finishes.
- 02
The building work also has an influence: adjusting a very irregular space or removing an old wardrobe changes the job. For a ballpark figure in Dénia, send us your configuration with measurements; the team replies within 24 hours. The measuring visit costs €50 if you do not go ahead and is free if you do, and manufacture takes an average of two to three weeks.
Limits of the space and alternatives
Not every space can take a made-to-measure fitted wardrobe. If the depth is less than about 45 centimetres, a front-facing rail will not fit and you will need to hang clothes sideways or use shelves. If there is a window or a radiator that cannot be moved, the wardrobe has to stop there, and it then makes sense to combine a fitted wardrobe with a separate module to one side.
If you live in Dénia and the space opens onto a long, narrow hallway, a floor-to-ceiling wardrobe can take away walking room; there, a shallow wardrobe or a corner wardrobe may work better. With photos and measurements, we look at each case and propose what fits.
09 — Enquiry
Share your fitted wardrobe idea for Dénia with us
- 1We read your message and look at your photos.
- 2If you message us from Dénia on WhatsApp, we will reply with an initial figure.
- 3We measure up in Dénia and, using those measurements, give you the final quote. The measuring visit costs €50 if you do not place an order, and is free if you do.
Until you are happy with the design and the price, we leave the boards untouched; that is how we work in Dénia.
10 — Questions
Questions about fitted wardrobes
Once the installation is finished, warranty for your wardrobe and practical care tips.
Can you make use of an alcove that is not square?
Yes. It is measured at several points, designed to the smallest measurement and the differences are covered with trim pieces and closing profiles. The visual result is that of a fitted wardrobe tailored to the wall, with no visible gaps at the sides.
Does a fitted wardrobe need building work?
Not always. If the space already exists and the walls are finished, it is installed directly. You may need to remove a skirting board, run a cable or level a particular spot, but no partition walls are knocked down.
Can I take the wardrobe up to the ceiling with a top cupboard?
Yes, and it is the most common choice for a floor-to-ceiling wardrobe. The top cupboard is separated into its own module, with smaller doors, and it is best kept for suitcases and seasonal clothes.
Can I reuse anything from the old wardrobe when the new one is installed?
It depends on the condition of the structure. If it is sound, the carcass can be kept and the doors and interior renewed; if there is damp or swollen boards, it is usually better to replace it entirely.
How much depth do I need for a wall-to-wall wardrobe?
Between 55 and 60 centimetres allows you to hang clothes facing forwards. With 40 to 45 you hang them sideways or use shelves. Measure the depth at several points before deciding.
What happens if I move home later on?
A fitted wardrobe is built for its own space, so it is not easy to move. That is why it is worth planning it to stay and choosing a design that will stand up well to the passing years.
Got a space you're not making the most of?
Are you in Dénia? Photograph the space head-on, take the horizontal measurement at the top and the bottom, and send us everything on WhatsApp. We charge €50 for measuring if you don't place an order; if you do, the measuring visit is included at no cost.

